Skip to content

Load Balancer for multi-node GitLab

DETAILS: Tier: Free, Premium, Ultimate Offering: Self-managed

In a multi-node GitLab configuration, you need a load balancer to route traffic to the application servers. The specifics on which load balancer to use or the exact configuration is beyond the scope of GitLab documentation. We hope that if you're managing HA systems like GitLab you have a load balancer of choice already. Some examples including HAProxy (open-source), F5 Big-IP LTM, and Citrix NetScaler. This documentation outlines what ports and protocols to use with GitLab.

SSL

How do you want to handle SSL in your multi-node environment? There are several different options:

  • Each application node terminates SSL
  • The load balancers terminate SSL and communication is not secure between the load balancers and the application nodes
  • The load balancers terminate SSL and communication is secure between the load balancers and the application nodes

Application nodes terminate SSL

Configure your load balancers to pass connections on port 443 as 'TCP' rather than 'HTTP(S)' protocol. This passes the connection to the application nodes NGINX service untouched. NGINX has the SSL certificate and listen on port 443.

See the HTTPS documentation for details on managing SSL certificates and configuring NGINX.

Load Balancers terminate SSL without backend SSL

Configure your load balancers to use the HTTP(S) protocol rather than TCP. The load balancers are responsible for managing SSL certificates and terminating SSL.

Because communication between the load balancers and GitLab isn't secure, there is some additional configuration needed. See the proxied SSL documentation for details.

Load Balancers terminate SSL with backend SSL

Configure your load balancers to use the HTTP(S) protocol rather than TCP. The load balancers is responsible for managing SSL certificates that end users see.

Traffic is secure between the load balancers and NGINX in this scenario. There is no need to add configuration for proxied SSL because the connection is secure all the way. However, configuration must be added to GitLab to configure SSL certificates. See the HTTPS documentation for details on managing SSL certificates and configuring NGINX.

Ports

Basic ports

LB Port Backend Port Protocol
80 80 HTTP (1)
443 443 TCP or HTTPS (1) (2)
22 22 TCP
  • (1): Web terminal support requires your load balancer to correctly handle WebSocket connections. When using HTTP or HTTPS proxying, this means your load balancer must be configured to pass through the Connection and Upgrade hop-by-hop headers. See the web terminal integration guide for more details.
  • (2): When using HTTPS protocol for port 443, you must add an SSL certificate to the load balancers. If you wish to terminate SSL at the GitLab application server instead, use TCP protocol.

GitLab Pages Ports

If you're using GitLab Pages with custom domain support you need some additional port configurations. GitLab Pages requires a separate virtual IP address. Configure DNS to point the pages_external_url from /etc/gitlab/gitlab.rb at the new virtual IP address. See the GitLab Pages documentation for more information.

LB Port Backend Port Protocol
80 Varies (1) HTTP
443 Varies (1) TCP (2)
  • (1): The backend port for GitLab Pages depends on the gitlab_pages['external_http'] and gitlab_pages['external_https'] setting. See GitLab Pages documentation for more details.
  • (2): Port 443 for GitLab Pages should always use the TCP protocol. Users can configure custom domains with custom SSL, which would not be possible if SSL was terminated at the load balancer.

Alternate SSH Port

Some organizations have policies against opening SSH port 22. In this case, it may be helpful to configure an alternate SSH hostname that allows users to use SSH on port 443. An alternate SSH hostname requires a new virtual IP address compared to the other GitLab HTTP configuration above.

Configure DNS for an alternate SSH hostname such as altssh.gitlab.example.com.

LB Port Backend Port Protocol
443 22 TCP

Readiness check

It is strongly recommend that multi-node deployments configure load balancers to use the readiness check to ensure a node is ready to accept traffic, before routing traffic to it. This is especially important when using Puma, because there is a brief period during a restart where Puma doesn't accept requests.

WARNING: Using the all=1 parameter with the readiness check in GitLab versions 15.4 to 15.8 may cause increased Praefect memory usage and lead to memory errors.

Troubleshooting

The health check is returning a 408 HTTP code via the load balancer

If you are using AWS's Classic Load Balancer in GitLab 15.0 or later, you must to enable the AES256-GCM-SHA384 cipher in NGINX. See AES256-GCM-SHA384 SSL cipher no longer allowed by default by NGINX for more information.

The default ciphers for a GitLab version can be viewed in the files/gitlab-cookbooks/gitlab/attributes/default.rb file and selecting the Git tag that correlates with your target GitLab version (for example 15.0.5+ee.0). If required by your load balancer, you can then define custom SSL ciphers for NGINX.

Some pages and links are downloaded instead of rendered in the browser

Some GitLab features require the use of WebSockets. In some scenarios where WebSockets support is not enabled on your load balancer, you could experience some links or pages downloading instead of being rendered in the browser. The files downloaded may contain content that look like the following:

One or more reserved bits are on: reserved1 = 1, reserved2 = 0, reserved3 = 0

Your load balancer must be capable of supporting HTTP WebSocket requests. If links are downloading this way, check your load balancer configuration and ensure that HTTP WebSocket requests are enabled.