- Dec 12, 2015
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MIPS: fix DMA contiguous allocation sh64: fix __NR_fgetxattr ocfs2: fix SGID not inherited issue mm/oom_kill.c: avoid attempting to kill init sharing same memory drivers/base/memory.c: prohibit offlining of memory blocks with missing sections tmpfs: fix shmem_evict_inode() warnings on i_blocks mm/hugetlb.c: fix resv map memory leak for placeholder entries mm: hugetlb: call huge_pte_alloc() only if ptep is null kernel: remove stop_machine() Kconfig dependency mm: kmemleak: mark kmemleak_init prototype as __init mm: fix kerneldoc on mem_cgroup_replace_page osd fs: __r4w_get_page rely on PageUptodate for uptodate MAINTAINERS: make Vladimir co-maintainer of the memory controller mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo memcg: fix memory.high target mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Fix the boot crash on Mako machines with Huge Pages, prevent a panic with SATA controllers (and others) by correctly calculating the IOMMU space, hook up the mlock2 syscall and drop unneeded code in the parisc pci code" * 'parisc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Disable huge pages on Mako machines parisc: Wire up mlock2 syscall parisc: Remove unused pcibios_init_bus() parisc iommu: fix panic due to trying to allocate too large region
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "A set of fixes for the current series. This contains: - A bunch of fixes for lightnvm, should be the last round for this series. From Matias and Wenwei. - A writeback detach inode fix from Ilya, also marked for stable. - A block (though it says SCSI) fix for an OOPS in SCSI runtime power management. - Module init error path fixes for null_blk from Minfei" * 'for-linus' of git://git.kernel.dk/linux-block: null_blk: Fix error path in module initialization lightnvm: do not compile in debugging by default lightnvm: prevent gennvm module unload on use lightnvm: fix media mgr registration lightnvm: replace req queue with nvmdev for lld lightnvm: comments on constants lightnvm: check mm before use lightnvm: refactor spin_unlock in gennvm_get_blk lightnvm: put blks when luns configure failed lightnvm: use flags in rrpc_get_blk block: detach bdev inode from its wb in __blkdev_put() SCSI: Fix NULL pointer dereference in runtime PM -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Update the linker script to use L1_CACHE_BYTES instead of hard-coded 64. We recently changed L1_CACHE_BYTES to 128 - Improve race condition reporting on set_pte_at() and change the BUG to WARN_ONCE. With hardware update of the accessed/dirty state, we need to ensure that set_pte_at() does not inadvertently override hardware updated state. The patch also makes the checks ignore !pte_valid() new entries * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Improve error reporting on set_pte_at() checks arm64: update linker script to increased L1_CACHE_BYTES value
-
Qais Yousef authored
Recent changes to how GFP_ATOMIC is defined seems to have broken the condition to use mips_alloc_from_contiguous() in mips_dma_alloc_coherent(). I couldn't bottom out the exact change but I think it's this commit d0164adc ("mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd"). GFP_ATOMIC has multiple bits set and the check for !(gfp & GFP_ATOMIC) isn't enough. The reason behind this condition is to check whether we can potentially do a sleeping memory allocation. Use gfpflags_allow_blocking() instead which should be more robust. Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitry V. Levin authored
According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr has to be defined to 259, but it doesn't. Instead, it's defined to 269, which is of course used by another syscall, __NR_sched_setaffinity in this case. This bug was found by strace test suite. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Junxiao Bi authored
Commit 8f1eb487 ("ocfs2: fix umask ignored issue") introduced an issue, SGID of sub dir was not inherited from its parents dir. It is because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but is overwritten by "mode" which don't have SGID set later. Fixes: 8f1eb487 ("ocfs2: fix umask ignored issue") Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chen Jie authored
It's possible that an oom killed victim shares an ->mm with the init process and thus oom_kill_process() would end up trying to kill init as well. This has been shown in practice: Out of memory: Kill process 9134 (init) score 3 or sacrifice child Killed process 9134 (init) total-vm:1868kB, anon-rss:84kB, file-rss:572kB Kill process 1 (init) sharing same memory ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 And this will result in a kernel panic. If a process is forked by init and selected for oom kill while still sharing init_mm, then it's likely this system is in a recoverable state. However, it's better not to try to kill init and allow the machine to panic due to unkillable processes. [rientjes@google.com: rewrote changelog] [akpm@linux-foundation.org: fix inverted test, per Ben] Signed-off-by:
Chen Jie <chenjie6@huawei.com> Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Seth Jennings authored
Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems") and 982792c7 ("x86, mm: probe memory block size for generic x86 64bit") introduced large block sizes for x86. This made it possible to have multiple sections per memory block where previously, there was a only every one section per block. Since blocks consist of contiguous ranges of section, there can be holes in the blocks where sections are not present. If one attempts to offline such a block, a crash occurs since the code is not designed to deal with this. This patch is a quick fix to gaurd against the crash by not allowing blocks with non-present sections to be offlined. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=107781 Signed-off-by:
Seth Jennings <sjennings@variantweb.net> Reported-by:
Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f5 ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Mike Kravetz authored
Dmitry Vyukov reported the following memory leak unreferenced object 0xffff88002eaafd88 (size 32): comm "a.out", pid 5063, jiffies 4295774645 (age 15.810s) hex dump (first 32 bytes): 28 e9 4e 63 00 88 ff ff 28 e9 4e 63 00 88 ff ff (.Nc....(.Nc.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc include/linux/slab.h:458 region_chg+0x2d4/0x6b0 mm/hugetlb.c:398 __vma_reservation_common+0x2c3/0x390 mm/hugetlb.c:1791 vma_needs_reservation mm/hugetlb.c:1813 alloc_huge_page+0x19e/0xc70 mm/hugetlb.c:1845 hugetlb_no_page mm/hugetlb.c:3543 hugetlb_fault+0x7a1/0x1250 mm/hugetlb.c:3717 follow_hugetlb_page+0x339/0xc70 mm/hugetlb.c:3880 __get_user_pages+0x542/0xf30 mm/gup.c:497 populate_vma_page_range+0xde/0x110 mm/gup.c:919 __mm_populate+0x1c7/0x310 mm/gup.c:969 do_mlock+0x291/0x360 mm/mlock.c:637 SYSC_mlock2 mm/mlock.c:658 SyS_mlock2+0x4b/0x70 mm/mlock.c:648 Dmitry identified a potential memory leak in the routine region_chg, where a region descriptor is not free'ed on an error path. However, the root cause for the above memory leak resides in region_del. In this specific case, a "placeholder" entry is created in region_chg. The associated page allocation fails, and the placeholder entry is left in the reserve map. This is "by design" as the entry should be deleted when the map is released. The bug is in the region_del routine which is used to delete entries within a specific range (and when the map is released). region_del did not handle the case where a placeholder entry exactly matched the start of the range range to be deleted. In this case, the entry would not be deleted and leaked. The fix is to take these special placeholder entries into account in region_del. The region_chg error path leak is also fixed. Fixes: feba16e2 ("mm/hugetlb: add region_del() to delete a specific range of entries") Signed-off-by:Mike Kravetz <mike.kravetz@oracle.com> Reported-by:
-
Naoya Horiguchi authored
Currently at the beginning of hugetlb_fault(), we call huge_pte_offset() and check whether the obtained *ptep is a migration/hwpoison entry or not. And if not, then we get to call huge_pte_alloc(). This is racy because the *ptep could turn into migration/hwpoison entry after the huge_pte_offset() check. This race results in BUG_ON in huge_pte_alloc(). We don't have to call huge_pte_alloc() when the huge_pte_offset() returns non-NULL, so let's fix this bug with moving the code into else block. Note that the *ptep could turn into a migration/hwpoison entry after this block, but that's not a problem because we have another !pte_present check later (we never go into hugetlb_no_page() in that case.) Fixes: 290408d4 ("hugetlb: hugepage migration core") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
-
Chris Wilson authored
Currently the full stop_machine() routine is only enabled on SMP if module unloading is enabled, or if the CPUs are hotpluggable. This leads to configurations where stop_machine() is broken as it will then only run the callback on the local CPU with irqs disabled, and not stop the other CPUs or run the callback on them. For example, this breaks MTRR setup on x86 in certain configs since ea8596bb ("kprobes/x86: Remove unused text_poke_smp() and text_poke_smp_batch() functions") as the MTRR is only established on the boot CPU. This patch removes the Kconfig option for STOP_MACHINE and uses the SMP and HOTPLUG_CPU config options to compile the correct stop_machine() for the architecture, removing the false dependency on MODULE_UNLOAD in the process. Link: https://lkml.org/lkml/2014/10/8/124 References: https://bugs.freedesktop.org/show_bug.cgi?id=84794 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Nicolas Iooss authored
The kmemleak_init() definition in mm/kmemleak.c is marked __init but its prototype in include/linux/kmemleak.h is marked __ref since commit a6186d89 ("kmemleak: Mark the early log buffer as __initdata"). This causes a section mismatch which is reported as a warning when building with clang -Wsection, because kmemleak_init() is declared in section .ref.text but defined in .init.text. Fix this by marking kmemleak_init() prototype __init. Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Hugh Dickins authored
Whoops, I missed removing the kerneldoc comment of the lrucare arg removed from mem_cgroup_replace_page; but it's a good comment, keep it. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Hugh Dickins authored
Commit 42cb14b1 ("mm: migrate dirty page without clear_page_dirty_for_io etc") simplified the migration of a PageDirty pagecache page: one stat needs moving from zone to zone and that's about all. It's convenient and safest for it to shift the PageDirty bit from old page to new, just before updating the zone stats: before copying data and marking the new PageUptodate. This is all done while both pages are isolated and locked, just as before; and just as before, there's a moment when the new page is visible in the radix_tree, but not yet PageUptodate. What's new is that it may now be briefly visible as PageDirty before it is PageUptodate. When I scoured the tree to see if this could cause a problem anywhere, the only places I found were in two similar functions __r4w_get_page(): which look up a page with find_get_page() (not using page lock), then claim it's uptodate if it's PageDirty or PageWriteback or PageUptodate. I'm not sure whether that was right before, but now it might be wrong (on rare occasions): only claim the page is uptodate if PageUptodate. Or perhaps the page in question could never be migratable anyway? Signed-off-by:
Boaz Harrosh <ooo@electrozaur.com> Cc: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by:
-
Johannes Weiner authored
Vladimir architected and authored much of the current state of the memcg's slab memory accounting and tracking. Make sure he gets CC'd on bug reports ;-) Signed-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
-
Michal Hocko authored
Tetsuo Handa has reported that the system might basically livelock in OOM condition without triggering the OOM killer. The issue is caused by internal dependency of the direct reclaim on vmstat counter updates (via zone_reclaimable) which are performed from the workqueue context. If all the current workers get assigned to an allocation request, though, they will be looping inside the allocator trying to reclaim memory but zone_reclaimable can see stalled numbers so it will consider a zone reclaimable even though it has been scanned way too much. WQ concurrency logic will not consider this situation as a congested workqueue because it relies that worker would have to sleep in such a situation. This also means that it doesn't try to spawn new workers or invoke the rescuer thread if the one is assigned to the queue. In order to fix this issue we need to do two things. First we have to let wq concurrency code know that we are in trouble so we have to do a short sleep. In order to prevent from issues handled by 0e093d99 ("writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone") we limit the sleep only to worker threads which are the ones of the interest anyway. The second thing to do is to create a dedicated workqueue for vmstat and mark it WQ_MEM_RECLAIM to note it participates in the reclaim and to have a spare worker thread for it. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Cristopher Lameter <clameter@sgi.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
Commit 016c13da ("mm, page_alloc: use masks and shifts when converting GFP flags to migrate types") has swapped MIGRATE_MOVABLE and MIGRATE_RECLAIMABLE in the enum definition. However, migratetype_names wasn't updated to reflect that. As a result, the file /proc/pagetypeinfo shows the counts for Movable as Reclaimable and vice versa. Additionally, commit 0aaa29a5 ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand") introduced MIGRATE_HIGHATOMIC, but did not add a letter to distinguish it into show_migration_types(), so it doesn't appear in the listing of free areas during page alloc failures or oom kills. This patch fixes both problems. The atomic reserves will show with a letter 'H' in the free areas listings. Fixes: 016c13da ("mm, page_alloc: use masks and shifts when converting GFP flags to migrate types") Fixes: 0aaa29a5 ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Vladimir Davydov authored
When the memory.high threshold is exceeded, try_charge() schedules a task_work to reclaim the excess. The reclaim target is set to the number of pages requested by try_charge(). This is wrong, because try_charge() usually charges more pages than requested (batch > nr_pages) in order to refill per cpu stocks. As a result, a process in a cgroup can easily exceed memory.high significantly when doing a lot of charges w/o returning to userspace (e.g. reading a file in big chunks). Fix this issue by assuring that when exceeding memory.high a process reclaims as many pages as were actually charged (i.e. batch). Signed-off-by:
-
Naoya Horiguchi authored
When dequeue_huge_page_vma() in alloc_huge_page() fails, we fall back on alloc_buddy_huge_page() to directly create a hugepage from the buddy allocator. In that case, however, if alloc_buddy_huge_page() succeeds we don't decrement h->resv_huge_pages, which means that successful hugetlb_fault() returns without releasing the reserve count. As a result, subsequent hugetlb_fault() might fail despite that there are still free hugepages. This patch simply adds decrementing code on that code path. I reproduced this problem when testing v4.3 kernel in the following situation: - the test machine/VM is a NUMA system, - hugepage overcommiting is enabled, - most of hugepages are allocated and there's only one free hugepage which is on node 0 (for example), - another program, which calls set_mempolicy(MPOL_BIND) to bind itself to node 1, tries to allocate a hugepage, - the allocation should fail but the reserve count is still hold. Signed-off-by:
-
Helge Deller authored
Mako-based machines (PA8800 and PA8900 CPUs) don't allow aliasing on non-equaivalent addresses. Signed-off-by:Helge Deller <deller@gmx.de>
-
Helge Deller authored
Signed-off-by: -
Bjorn Helgaas authored
There are no callers of pcibios_init_bus(), so remove it. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Mikulas Patocka authored
When using the Promise TX2+ SATA controller on PA-RISC, the system often crashes with kernel panic, for example just writing data with the dd utility will make it crash. Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2 Backtrace: [<000000004021497c>] show_stack+0x14/0x20 [<0000000040410bf0>] dump_stack+0x88/0x100 [<000000004023978c>] panic+0x124/0x360 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0 [<0000000040453150>] sba_map_sg+0x260/0x5b8 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata] [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata] [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata] [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130 [<000000004049da34>] scsi_request_fn+0x6e4/0x970 [<00000000403e95a8>] __blk_run_queue+0x40/0x60 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68 [<000000004049a534>] scsi_run_queue+0x2a4/0x360 [<000000004049be68>] scsi_end_request+0x1a8/0x238 [<000000004049de84>] scsi_io_completion+0xfc/0x688 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0 The cause of the crash is not exhaustion of the IOMMU space, there is plenty of free pages. The function sba_alloc_range is called with size 0x11000, thus the pages_needed variable is 0x11. The function sba_search_bitmap is called with bits_wanted 0x11 and boundary size is 0x10 (because dma_get_seg_boundary(dev) returns 0xffff). The function sba_search_bitmap attempts to allocate 17 pages that must not cross 16-page boundary - it can't satisfy this requirement (iommu_is_span_boundary always returns true) and fails even if there are many free entries in the IOMMU space. How did it happen that we try to allocate 17 pages that don't cross 16-page boundary? The cause is in the function iommu_coalesce_chunks. This function tries to coalesce adjacent entries in the scatterlist. The function does several checks if it may coalesce one entry with the next, one of those checks is this: if (startsg->length + dma_len > max_seg_size) break; When it finishes coalescing adjacent entries, it allocates the mapping: sg_dma_len(contig_sg) = dma_len; dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); sg_dma_address(contig_sg) = PIDE_FLAG | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) | dma_offset; It is possible that (startsg->length + dma_len > max_seg_size) is false (we are just near the 0x10000 max_seg_size boundary), so the funcion decides to coalesce this entry with the next entry. When the coalescing succeeds, the function performs dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); And now, because of non-zero dma_offset, dma_len is greater than 0x10000. iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts to allocate 17 pages for a device that must not cross 16-page boundary. To fix the bug, we must make sure that dma_len after addition of dma_offset and alignment doesn't cross the segment boundary. I.e. change if (startsg->length + dma_len > max_seg_size) break; to if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size) break; This patch makes this change (it precalculates max_seg_boundary at the beginning of the function iommu_coalesce_chunks). I also added a check that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is not needed for Promise TX2+ SATA, but it may be needed for other devices that have dma_get_seg_boundary lower than dma_get_max_seg_size). Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- Dec 11, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: "Five stable fixes: - Two DM btree bufio buffer leak fixes that resolve reported BUG_ONs during DM thinp metadata close's dm_bufio_client_destroy(). - A DM thinp range discard fix to handle discarding a partially mapped range. - A DM thinp metadata snapshot fix to make sure the btree roots saved in the metadata snapshot are the most current. - A DM space map metadata refcounting fix that improves both DM thinp and DM cache metadata" * tag 'dm-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm btree: fix bufio buffer leaks in dm_btree_del() error path dm space map metadata: fix ref counting bug when bootstrapping a new space map dm thin metadata: fix bug when taking a metadata snapshot dm thin metadata: fix bug in dm_thin_remove_range() dm btree: fix leak of bufio-backed block in btree_split_sibling error path -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "Two bugfixes, both bound for -stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: break infinite loop in fuse_fill_write_pages() cuse: fix memory leak
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not too much this time. - One nouveau workaround extended to a few more GPUs - Some amdgpu big endian fixes, and a regression fixer - Some vmwgfx fixes - One ttm locking fix - One vgaarb fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vgaarb: fix signal handling in vga_get() radeon: Fix VCE IB test on Big-Endian systems radeon: Fix VCE ring test for Big-Endian systems radeon/cik: Fix GFX IB test on Big-Endian drm/amdgpu: fix the lost duplicates checking drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by default drm/vmwgfx: Implement the cursor_set2 callback v2 drm/vmwgfx: fix a warning message drm/ttm: Fixed a read/write lock imbalance
-
Catalin Marinas authored
Currently the BUG_ON() checks do not give enough information about the PTEs being set. This patch changes BUG_ON to WARN_ONCE and dumps the values of the old and new PTEs. In addition, the checks are only made if the new PTE entry is valid. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Cc: Will Deacon <will.deacon@arm.com>
-
Kirill A. Shutemov authored
There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by:Kirill A. Shutemov <kirill@shutemov.name> Cc: stable@vger.kernel.org Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
some big endian fixes and one regression fix. * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: radeon: Fix VCE IB test on Big-Endian systems radeon: Fix VCE ring test for Big-Endian systems radeon/cik: Fix GFX IB test on Big-Endian drm/amdgpu: fix the lost duplicates checking
-
- Dec 10, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "Most are minor to important fixes. There is one performance enhancement that I took on the grounds that failing to check if other processes can run before running what's intended to be a background, idle-time task is a bug, even though the primary effect of the fix is to improve performance (and it was a very simple patch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Postpone remove_keys under knowledge of coming preemption IB/mlx4: Use vmalloc for WR buffers when needed IB/mlx4: Use correct order of variables in log message iser-target: Remove explicit mlx4 work-around mlx4: Expose correct max_sge_rd limit IB/mad: Require CM send method for everything except ClassPortInfo IB/cma: Add a missing rcu_read_unlock() IB core: Fix ib_sg_to_pages() IB/srp: Fix srp_map_sg_fr() IB/srp: Fix indirect data buffer rkey endianness IB/srp: Initialize dma_length in srp_map_idb IB/srp: Fix possible send queue overflow IB/srp: Fix a memory leak IB/sa: Put netlink request into the request list before sending IB/iser: use sector_div instead of do_div IB/core: use RCU for uverbs id lookup IB/qib: Minor fixes to qib per SFF 8636 IB/core: Fix user mode post wr corruption IB/qib: Fix qib_mr structure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Again less intensive changes in this rc: you can find only a few HD-audio fixes (noise fixes for Intel Broxton chip and a few Thinkpad models, quirks for Alienware 17 and Packard Bell DOTS) in addition to a long-standing rme96 bug fix" * tag 'sound-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - quirk for Alienware 17 2015 ALSA: hda - Fix noise problems on Thinkpad T440s ALSA: hda - Fixing speaker noise on the two latest thinkpad models ALSA: hda - Add inverted dmic for Packard Bell DOTS ALSA: hda - Fix playback noise with 24/32 bit sample size on BXT ALSA: rme96: Fix unexpected volume reset after rate changes
-
Joe Thornber authored
If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Various fixes for removing redundancy, const'ifying structs, avoiding stack usage, fixing WARN usage (Krzysztof Kozlowski, Julia Lawall, Kees Cook, Dan Carpenter) - Revert No-IOMMU mode as the intended user has not emerged (Alex Williamson) * tag 'vfio-v4.4-rc5' of git://github.com/awilliam/linux-vfio: Revert: "vfio: Include No-IOMMU mode" vfio: fix a warning message vfio: platform: remove needless stack usage vfio-pci: constify pci_error_handlers structures vfio: Drop owner assignment from platform_driver
-
Linus Torvalds authored
Merge tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DT fixes from Rob Herring: "I think this should be all for 4.4: - Fix incorrect warning about overlapping memory regions - Export of_irq_find_parent again which was made static in 4.4, but has users pending for 4.5. - Fix of_msi_map_rid declaration location - Fix re-entrancy for of_fdt_unflatten_tree - Clean-up of phys_addr_t printks" * tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/irq: move of_msi_map_rid declaration to the correct ifdef section of/irq: Export of_irq_find_parent again of/fdt: Add mutex protection for calls to __unflatten_device_tree() of/address: fix typo in comment block of of_translate_one() of: do not use 0x in front of %pa of: Fix comparison of reserved memory regions -
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "One small build fix, a couple do_div() fixes, and a fix for the gpio basic clock type are the major changes here. There's also a couple fixes for the TI, sunxi, and scpi clock drivers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi: pll2: Fix clock running too fast clk: scpi: add missing of_node_put clk: qoriq: fix memory leak imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage clk: mmp: add linux/clk.h includes clk: ti: drop locking code from mux/divider drivers clk: ti816x: Add missing dmtimer clkdev entries clk: ti: fapll: fix wrong do_div() usage clk: ti: clkt_dpll: fix wrong do_div() usage clk: gpio: Get parent clk names in of_gpio_clk_setup()
-
- Dec 09, 2015
-
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI fix from Corey Minyard: "Fix an Oops if an interrupt occurs at startup. This can happen on some hardware" * tag 'for-linus-4.4-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: move timer init to before irq is setup
-
Jan Stancek authored
We encountered a panic on boot in ipmi_si on a dell per320 due to an uninitialized timer as follows. static int smi_start_processing(void *send_info, ipmi_smi_t intf) { /* Try to claim any interrupts. */ if (new_smi->irq_setup) new_smi->irq_setup(new_smi); --> IRQ arrives here and irq handler tries to modify uninitialized timer which triggers BUG_ON(!timer->function) in __mod_timer(). Call Trace: <IRQ> [<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si] [<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si] [<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si] [<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350 [<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si] [<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170 [<ffffffff810f245e>] handle_edge_irq+0xde/0x180 [<ffffffff8100fc59>] handle_irq+0x49/0xa0 [<ffffffff8154643c>] do_IRQ+0x6c/0xf0 [<ffffffff8100ba53>] ret_from_intr+0x0/0x11 /* Set up the timer that drives the interface. */ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); The following patch fixes the problem. To: Openipmi-developer@lists.sourceforge.net To: Corey Minyard <minyard@acm.org> CC: linux-kernel@vger.kernel.org Signed-off-by:Jan Stancek <jstancek@redhat.com> Signed-off-by:
Tony Camuso <tcamuso@redhat.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # Applies cleanly to 3.10-, needs small rework before
-
Sasha Levin authored
ROL on a 32 bit integer with a shift of 32 or more is undefined and the result is arch-dependent. Avoid this by handling the trivial case of roling by 0 correctly. The trivial solution of checking if shift is 0 breaks gcc's detection of this code as a ROL instruction, which is unacceptable. This bug was reported and fixed in GCC (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57157): The standard rotate idiom, (x << n) | (x >> (32 - n)) is recognized by gcc (for concreteness, I discuss only the case that x is an uint32_t here). However, this is portable C only for n in the range 0 < n < 32. For n == 0, we get x >> 32 which gives undefined behaviour according to the C standard (6.5.7, Bitwise shift operators). To portably support n == 0, one has to write the rotate as something like (x << n) | (x >> ((-n) & 31)) And this is apparently not recognized by gcc. Note that this is broken on older GCCs and will result in slower ROL. Acked-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
