- Oct 22, 2015
-
-
Greg Kroah-Hartman authored
-
Christoph Hellwig authored
commit 15e3d5a2 upstream. 3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by:
Tóth Attila <atoth@atoth.sote.hu> Tested-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit fc2ca674 upstream. Commit 3adeb256 ("MIPS: Loongson: Improve LEFI firmware interface") made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured. Unfortunately, it did not initialize the number of UARTs if LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e system has no console. Fixes: 3adeb256 ("MIPS: Loongson: Improve LEFI firmware interface") Acked-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11076/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Joonsoo Kim authored
commit 03a2d2a3 upstream. Commit description is copied from the original post of this bug: http://comments.gmane.org/gmane.linux.kernel.mm/135349 Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next larger cache size than the size index INDEX_NODE mapping. In kernels 3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size. However, sometimes we can't get the right output we expected via kmalloc_size(INDEX_NODE + 1), causing a BUG(). The mapping table in the latest kernel is like: index = {0, 1, 2 , 3, 4, 5, 6, n} size = {0, 96, 192, 8, 16, 32, 64, 2^n} The mapping table before 3.10 is like this: index = {0 , 1 , 2, 3, 4 , 5 , 6, n} size = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)} The problem on my mips64 machine is as follows: (1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150", and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE kmalloc_index(sizeof(struct kmem_cache_node)) (2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8. (3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size = PAGE_SIZE". (4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and "flags |= CFLGS_OFF_SLAB" will be covered. (5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result here may be NULL while kernel bootup. (6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the BUG info as the following shows (may be only mips64 has this problem): This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes the BUG by adding 'size >= 256' check to guarantee that all necessary small sized slabs are initialized regardless sequence of slab size in mapping table. Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...") Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Liuhailong <liu.hailong6@zte.com.cn> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Prarit Bhargava authored
commit 7180dddf upstream. The kernel may delay interrupts for a long time which can result in timers being delayed. If this occurs the intel_pstate driver will crash with a divide by zero error: divide error: 0000 [#1] SMP Modules linked in: btrfs zlib_deflate raid6_pq xor msdos ext4 mbcache jbd2 binfmt_misc arc4 md4 nls_utf8 cifs dns_resolver tcp_lp bnep bluetooth rfkill fuse dm_service_time iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ftp ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables intel_powerclamp coretemp vfat fat kvm_intel iTCO_wdt iTCO_vendor_support ipmi_devintf sr_mod kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel cdc_ether lrw usbnet cdrom mii gf128mul glue_helper ablk_helper cryptd lpc_ich mfd_core pcspkr sb_edac edac_core ipmi_si ipmi_msghandler ioatdma wmi shpchp acpi_pad nfsd auth_rpcgss nfs_acl lockd uinput dm_multipath sunrpc xfs libcrc32c usb_storage sd_mod crc_t10dif crct10dif_common ixgbe mgag200 syscopyarea sysfillrect sysimgblt mdio drm_kms_helper ttm igb drm ptp pps_core dca i2c_algo_bit megaraid_sas i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 113 PID: 0 Comm: swapper/113 Tainted: G W -------------- 3.10.0-229.1.2.el7.x86_64 #1 Hardware name: IBM x3950 X6 -[3837AC2]-/00FN827, BIOS -[A8E112BUS-1.00]- 08/27/2014 task: ffff880fe8abe660 ti: ffff880fe8ae4000 task.ti: ffff880fe8ae4000 RIP: 0010:[<ffffffff814a9279>] [<ffffffff814a9279>] intel_pstate_timer_func+0x179/0x3d0 RSP: 0018:ffff883fff4e3db8 EFLAGS: 00010206 RAX: 0000000027100000 RBX: ffff883fe6965100 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: 000000002e53632d RBP: ffff883fff4e3e20 R08: 000e6f69a5a125c0 R09: ffff883fe84ec001 R10: 0000000000000002 R11: 0000000000000005 R12: 00000000000049f5 R13: 0000000000271000 R14: 00000000000049f5 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff883fff4e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7668601000 CR3: 000000000190a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff883fff4e3e58 ffffffff81099dc1 0000000000000086 0000000000000071 ffff883fff4f3680 0000000000000071 fbdc8a965e33afee ffffffff810b69dd ffff883fe84ec000 ffff883fe6965108 0000000000000100 ffffffff814a9100 Call Trace: <IRQ> [<ffffffff81099dc1>] ? run_posix_cpu_timers+0x51/0x840 [<ffffffff810b69dd>] ? trigger_load_balance+0x5d/0x200 [<ffffffff814a9100>] ? pid_param_set+0x130/0x130 [<ffffffff8107df56>] call_timer_fn+0x36/0x110 [<ffffffff814a9100>] ? pid_param_set+0x130/0x130 [<ffffffff8107fdcf>] run_timer_softirq+0x21f/0x320 [<ffffffff81077b2f>] __do_softirq+0xef/0x280 [<ffffffff816156dc>] call_softirq+0x1c/0x30 [<ffffffff81015d95>] do_softirq+0x65/0xa0 [<ffffffff81077ec5>] irq_exit+0x115/0x120 [<ffffffff81616355>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff81614a1d>] apic_timer_interrupt+0x6d/0x80 <EOI> [<ffffffff814a9c32>] ? cpuidle_enter_state+0x52/0xc0 [<ffffffff814a9c28>] ? cpuidle_enter_state+0x48/0xc0 [<ffffffff814a9d65>] cpuidle_idle_call+0xc5/0x200 [<ffffffff8101d14e>] arch_cpu_idle+0xe/0x30 [<ffffffff810c67c1>] cpu_startup_entry+0xf1/0x290 [<ffffffff8104228a>] start_secondary+0x1ba/0x230 Code: 42 0f 00 45 89 e6 48 01 c2 43 8d 44 6d 00 39 d0 73 26 49 c1 e5 08 89 d2 4d 63 f4 49 63 c5 48 c1 e2 08 48 c1 e0 08 48 63 ca 48 99 <48> f7 f9 48 98 4c 0f af f0 49 c1 ee 08 8b 43 78 c1 e0 08 44 29 RIP [<ffffffff814a9279>] intel_pstate_timer_func+0x179/0x3d0 RSP <ffff883fff4e3db8> The kernel values for cpudata for CPU 113 were: struct cpudata { cpu = 113, timer = { entry = { next = 0x0, prev = 0xdead000000200200 }, expires = 8357799745, base = 0xffff883fe84ec001, function = 0xffffffff814a9100 <intel_pstate_timer_func>, data = 18446612406765768960, <snip> i_gain = 0, d_gain = 0, deadband = 0, last_err = 22489 }, last_sample_time = { tv64 = 4063132438017305 }, prev_aperf = 287326796397463, prev_mperf = 251427432090198, sample = { core_pct_busy = 23081, aperf = 2937407, mperf = 3257884, freq = 2524484, time = { tv64 = 4063149215234118 } } } which results in the time between samples = last_sample_time - sample.time = 4063149215234118 - 4063132438017305 = 16777216813 which is 16.777 seconds. The duration between reads of the APERF and MPERF registers overflowed a s32 sized integer in intel_pstate_get_scaled_busy()'s call to div_fp(). The result is that int_tofp(duration_us) == 0, and the kernel attempts to divide by 0. While the kernel shouldn't be delaying for a long time, it can and does happen and the intel_pstate driver should not panic in this situation. This patch changes the div_fp() function to use div64_s64() to allow for "long" division. This will avoid the overflow condition on long delays. [v2]: use div64_s64() in div_fp() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by:
-
Uwe Kleine-König authored
commit 8f1bd8f2 upstream. If atmel_init_gpios fails the port has already been marked as busy (in line 2629), so this must be undone in the error path. This bug was introduced because I created the patch that finally became 722ccf41 ("serial: atmel: fix error handling when mctrl_gpio_init fails") on top of 3.19 which didn't have commit 6fbb9bdf ("tty/serial: at91: fix error handling in atmel_serial_probe()") yet. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 722ccf41 ("serial: atmel: fix error handling when mctrl_gpio_init fails") Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Mans Rullgard authored
commit 3c5a0357 upstream. This adds an entry to the uart_config table for PORT_RT2880 enabling rx/tx FIFOs. The UART is actually a Palmchip BK-3103 which is found in several devices from Alchemy/RMI, Ralink, and Sigma Designs. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Jann Horn authored
commit 0c556271 upstream. This is mostly a hardening fix, given that write-only access to other users' ttys is usually only given through setgid tty executables. Signed-off-by:
Jann Horn <jann@thejh.net> Signed-off-by:
-
Kosuke Tatsukawa authored
commit e81107d4 upstream. My colleague ran into a program stall on a x86_64 server, where n_tty_read() was waiting for data even if there was data in the buffer in the pty. kernel stack for the stuck process looks like below. #0 [ffff88303d107b58] __schedule at ffffffff815c4b20 #1 [ffff88303d107bd0] schedule at ffffffff815c513e #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23 #5 [ffff88303d107dd0] tty_read at ffffffff81368013 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57 #8 [ffff88303d107f00] sys_read at ffffffff811a4306 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7 There seems to be two problems causing this issue. First, in drivers/tty/n_tty.c, __receive_buf() stores the data and updates ldata->commit_head using smp_store_release() and then checks the wait queue using waitqueue_active(). However, since there is no memory barrier, __receive_buf() could return without calling wake_up_interactive_poll(), and at the same time, n_tty_read() could start to wait in wait_woken() as in the following chart. __receive_buf() n_tty_read() ------------------------------------------------------------------------ if (waitqueue_active(&tty->read_wait)) /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ add_wait_queue(&tty->read_wait, &wait); ... if (!input_available_p(tty, 0)) { smp_store_release(&ldata->commit_head, ldata->read_head); ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ The second problem is that n_tty_read() also lacks a memory barrier call and could also cause __receive_buf() to return without calling wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken() as in the chart below. __receive_buf() n_tty_read() ------------------------------------------------------------------------ spin_lock_irqsave(&q->lock, flags); /* from add_wait_queue() */ ... if (!input_available_p(tty, 0)) { /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ smp_store_release(&ldata->commit_head, ldata->read_head); if (waitqueue_active(&tty->read_wait)) __add_wait_queue(q, wait); spin_unlock_irqrestore(&q->lock,flags); /* from add_wait_queue() */ ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ There are also other places in drivers/tty/n_tty.c which have similar calls to waitqueue_active(), so instead of adding many memory barrier calls, this patch simply removes the call to waitqueue_active(), leaving just wake_up*() behind. This fixes both problems because, even though the memory access before or after the spinlocks in both wake_up*() and add_wait_queue() can sneak into the critical section, it cannot go past it and the critical section assures that they will be serialized (please see "INTER-CPU ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a better explanation). Moreover, the resulting code is much simpler. Latency measurement using a ping-pong test over a pty doesn't show any visible performance drop. Signed-off-by:
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by:
-
covici@ccs.covici.com authored
commit b1d562ac upstream. Here is a patch to make speakup-r work again. It broke in 3.6 due to commit 4369c64c "Input: Send events one packet at a time) The problem was that the fakekey.c routine to fake a down arrow no longer functioned properly and putting the input_sync fixed it. Fixes: 4369c64c Acked-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
John Covici <covici@ccs.covici.com> Signed-off-by:
-
Joe Thornber authored
commit 2bffa150 upstream. The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Junichi Nomura authored
commit 2a708cff upstream. __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6 ("dm: hold suspend_lock while suspending device during device deletion") Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit daf3761c upstream. Leandro Awa writes: "After switching to version 4.1.6, our parallelized and distributed workflows now fail consistently with errors of the form: T34: ./regex.c:39:22: error: config.h: No such file or directory From our 'git bisect' testing, the following commit appears to be the possible cause of the behavior we've been seeing: commit 766c4cbf" Al Viro says: "What happens is that 766c4cbf got the things subtly wrong. We used to treat d_is_negative() after lookup_fast() as "fall with ENOENT". That was wrong - checking ->d_flags outside of ->d_seq protection is unreliable and failing with hard error on what should've fallen back to non-RCU pathname resolution is a bug. Unfortunately, we'd pulled the test too far up and ran afoul of another kind of staleness. The dentry might have been absolutely stable from the RCU point of view (and we might be on UP, etc), but stale from the remote fs point of view. If ->d_revalidate() returns "it's actually stale", dentry gets thrown away and the original code wouldn't even have looked at its ->d_flags. What we need is to check ->d_flags where 766c4cbf does (prior to ->d_seq validation) but only use the result in cases where we do not discard this dentry outright" Reported-by:
Leandro Awa <lawa@nvidia.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=104911 Fixes: 766c4cbf ("namei: d_is_negative() should be checked...") Tested-by:
Trond Myklebust <trond.myklebust@primarydata.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ben Dooks authored
commit 19e79687 upstream. On the OMAP AM3517 platform the uart4_ick gets registered twice, causing any power management to /dev/ttyO3 to fail when trying to wake the device up. This solves the following oops: [] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa09e008 [] PC is at serial_omap_pm+0x48/0x15c [] LR is at _raw_spin_unlock_irqrestore+0x30/0x5c Fixes: aafd900c ("CLK: TI: add omap3 clock init file") Cc: mturquette@baylibre.com Cc: sboyd@codeaurora.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@lists.codethink.co.uk Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Kinglong Mee authored
commit 3ec0c979 upstream. If filelayout_decode_layout fail, _filelayout_free_lseg will causes a double freeing of fh_array. [ 1179.279800] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1179.280198] IP: [<ffffffffa027222d>] filelayout_free_fh_array.isra.11+0x1d/0x70 [nfs_layout_nfsv41_files] [ 1179.281010] PGD 0 [ 1179.281443] Oops: 0000 [#1] [ 1179.281831] Modules linked in: nfs_layout_nfsv41_files(OE) nfsv4(OE) nfs(OE) fscache(E) xfs libcrc32c coretemp nfsd crct10dif_pclmul ppdev crc32_pclmul crc32c_intel auth_rpcgss ghash_clmulni_intel nfs_acl lockd vmw_balloon grace sunrpc parport_pc vmw_vmci parport shpchp i2c_piix4 vmwgfx drm_kms_helper ttm drm serio_raw mptspi scsi_transport_spi mptscsih e1000 mptbase ata_generic pata_acpi [last unloaded: fscache] [ 1179.283891] CPU: 0 PID: 13336 Comm: cat Tainted: G OE 4.3.0-rc1-pnfs+ #244 [ 1179.284323] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 [ 1179.285206] task: ffff8800501d48c0 ti: ffff88003e3c4000 task.ti: ffff88003e3c4000 [ 1179.285668] RIP: 0010:[<ffffffffa027222d>] [<ffffffffa027222d>] filelayout_free_fh_array.isra.11+0x1d/0x70 [nfs_layout_nfsv41_files] [ 1179.286612] RSP: 0018:ffff88003e3c77f8 EFLAGS: 00010202 [ 1179.287092] RAX: 0000000000000000 RBX: ffff88001fe78900 RCX: 0000000000000000 [ 1179.287731] RDX: ffffea0000f40760 RSI: ffff88001fe789c8 RDI: ffff88001fe789c0 [ 1179.288383] RBP: ffff88003e3c7810 R08: ffffea0000f40760 R09: 0000000000000000 [ 1179.289170] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001fe789c8 [ 1179.289959] R13: ffff88001fe789c0 R14: ffff88004ec05a80 R15: ffff88004f935b88 [ 1179.290791] FS: 00007f4e66bb5700(0000) GS:ffffffff81c29000(0000) knlGS:0000000000000000 [ 1179.291580] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1179.292209] CR2: 0000000000000000 CR3: 00000000203f8000 CR4: 00000000001406f0 [ 1179.292731] Stack: [ 1179.293195] ffff88001fe78900 00000000000000d0 ffff88001fe78178 ffff88003e3c7868 [ 1179.293676] ffffffffa0272737 0000000000000001 0000000000000001 ffff88001fe78800 [ 1179.294151] 00000000614fffce ffffffff81727671 ffff88001fe78100 ffff88001fe78100 [ 1179.294623] Call Trace: [ 1179.295092] [<ffffffffa0272737>] filelayout_alloc_lseg+0xa7/0x2d0 [nfs_layout_nfsv41_files] [ 1179.295625] [<ffffffff81727671>] ? out_of_line_wait_on_bit+0x81/0xb0 [ 1179.296133] [<ffffffffa040407e>] pnfs_layout_process+0xae/0x320 [nfsv4] [ 1179.296632] [<ffffffffa03e0a01>] nfs4_proc_layoutget+0x2b1/0x360 [nfsv4] [ 1179.297134] [<ffffffffa0402983>] pnfs_update_layout+0x853/0xb30 [nfsv4] [ 1179.297632] [<ffffffffa039db24>] ? nfs_get_lock_context+0x74/0x170 [nfs] [ 1179.298158] [<ffffffffa0271807>] filelayout_pg_init_read+0x37/0x50 [nfs_layout_nfsv41_files] [ 1179.298834] [<ffffffffa03a72d9>] __nfs_pageio_add_request+0x119/0x460 [nfs] [ 1179.299385] [<ffffffffa03a6bd7>] ? nfs_create_request.part.9+0x37/0x2e0 [nfs] [ 1179.299872] [<ffffffffa03a7cc3>] nfs_pageio_add_request+0xa3/0x1b0 [nfs] [ 1179.300362] [<ffffffffa03a8635>] readpage_async_filler+0x85/0x260 [nfs] [ 1179.300907] [<ffffffff81180cb1>] read_cache_pages+0x91/0xd0 [ 1179.301391] [<ffffffffa03a85b0>] ? nfs_read_completion+0x220/0x220 [nfs] [ 1179.301867] [<ffffffffa03a8dc8>] nfs_readpages+0x128/0x200 [nfs] [ 1179.302330] [<ffffffff81180ef3>] __do_page_cache_readahead+0x203/0x280 [ 1179.302784] [<ffffffff81180dc8>] ? __do_page_cache_readahead+0xd8/0x280 [ 1179.303413] [<ffffffff81181116>] ondemand_readahead+0x1a6/0x2f0 [ 1179.303855] [<ffffffff81181371>] page_cache_sync_readahead+0x31/0x50 [ 1179.304286] [<ffffffff811750a6>] generic_file_read_iter+0x4a6/0x5c0 [ 1179.304711] [<ffffffffa03a0316>] ? __nfs_revalidate_mapping+0x1f6/0x240 [nfs] [ 1179.305132] [<ffffffffa039ccf2>] nfs_file_read+0x52/0xa0 [nfs] [ 1179.305540] [<ffffffff811e343c>] __vfs_read+0xcc/0x100 [ 1179.305936] [<ffffffff811e3d15>] vfs_read+0x85/0x130 [ 1179.306326] [<ffffffff811e4a98>] SyS_read+0x58/0xd0 [ 1179.306708] [<ffffffff8172caaf>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 1179.307094] Code: c4 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 8b 07 49 89 f4 85 c0 74 47 48 8b 06 49 89 fd <48> 8b 38 48 85 ff 74 22 31 db eb 0c 48 63 d3 48 8b 3c d0 48 85 [ 1179.308357] RIP [<ffffffffa027222d>] filelayout_free_fh_array.isra.11+0x1d/0x70 [nfs_layout_nfsv41_files] [ 1179.309177] RSP <ffff88003e3c77f8> [ 1179.309582] CR2: 0000000000000000 Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Al Viro authored
commit 9391dd00 upstream. when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By:
Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By:
-
David Howells authored
commit 4bacc9c9 upstream. Make file->f_path always point to the overlay dentry so that the path in /proc/pid/fd is correct and to ensure that label-based LSMs have access to the overlay as well as the underlay (path-based LSMs probably don't need it). Using my union testsuite to set things up, before the patch I see: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:38 5 -> /a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 13381 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 13381 Links: 1 ... After the patch: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:22 5 -> /mnt/a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 40346 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 40346 Links: 1 ... Note the change in where /proc/$$/fd/5 points to in the ls command. It was pointing to /a/foo107 (which doesn't exist) and now points to /mnt/a/foo107 (which is correct). The inode accessed, however, is the lower layer. The union layer is on device 25h/37d and the upper layer on 24h/36d. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
commit f25801ee upstream. Call ovl_drop_write() earlier in ovl_dentry_open() before we call vfs_open() as we've done the copy up for which we needed the freeze-write lock by that point. Signed-off-by:
-
NeilBrown authored
commit da6fb7a9 upstream. Passing -1 to bitmap_storage_alloc() causes page->index to be set to -1, which is quite problematic. So only pass ->cluster_slot if mddev_is_clustered(). Fixes: b97e9257 ("Use separate bitmaps for each nodes in the cluster") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Ben Hutchings authored
commit 95c2b175 upstream. Per-IRQ directories in procfs are created only when a handler is first added to the irqdesc, not when the irqdesc is created. In the case of a shared IRQ, multiple tasks can race to create a directory. This race condition seems to have been present forever, but is easier to hit with async probing. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.uk Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Stefan Assmann authored
commit 6423fc34 upstream. During driver probing the following code path is triggered. igb_probe ->igb_sw_init ->igb_probe_vfs ->igb_pci_enable_sriov ->igb_sriov_reinit Doing the SR-IOV re-init is not necessary during probing since we're starting from scratch. Here we can call igb_enable_sriov() right away. Running igb_sriov_reinit() during igb_probe() also seems to cause occasional packet loss on some onboard 82576 NICs. Reproduced on Dell and HP servers with onboard 82576 NICs. Example: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Dell Device [1028:0481] Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Daniel J Blueman <daniel@numascale.com> Signed-off-by:
-
Chas Williams authored
commit 274b0455 upstream. If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: "Kamata, Munehisa" <kamatam@amazon.com> Signed-off-by:
-
Andreas Schwab authored
commit 8474ba74 upstream. Make sure the compiler does not modify arguments of syscall functions. This can happen if the compiler generates a tailcall to another function. For example, without asmlinkage_protect sys_openat is compiled into this function: sys_openat: clr.l %d0 move.w 18(%sp),%d0 move.l %d0,16(%sp) jbra do_sys_open Note how the fourth argument is modified in place, modifying the register %d4 that gets restored from this stack slot when the function returns to user-space. The caller may expect the register to be unmodified across system calls. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Mark Salyzyn authored
commit 569ba74a upstream. This is the arm64 portion of commit 45cac65b ("readahead: fault retry breaks mmap file read random detection"), which was absent from the initial port and has since gone unnoticed. The original commit says: > .fault now can retry. The retry can break state machine of .fault. In > filemap_fault, if page is miss, ra->mmap_miss is increased. In the second > try, since the page is in page cache now, ra->mmap_miss is decreased. And > these are done in one fault, so we can't detect random mmap file access. > > Add a new flag to indicate .fault is tried once. In the second try, skip > ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. With this change, Mark reports that: > Random read improves by 250%, sequential read improves by 40%, and > random write by 400% to an eMMC device with dm crypto wrapped around it. Cc: Shaohua Li <shli@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
Riley Andrews <riandrews@android.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Li Bin authored
commit ee556d00 upstream. When function graph tracer is enabled, the following operation will trigger panic: mount -t debugfs nodev /sys/kernel echo next_tgid > /sys/kernel/tracing/set_ftrace_filter echo function_graph > /sys/kernel/tracing/current_tracer ls /proc/ ------------[ cut here ]------------ [ 198.501417] Unable to handle kernel paging request at virtual address cb88537fdc8ba316 [ 198.506126] pgd = ffffffc008f79000 [ 198.509363] [cb88537fdc8ba316] *pgd=00000000488c6003, *pud=00000000488c6003, *pmd=0000000000000000 [ 198.517726] Internal error: Oops: 94000005 [#1] SMP [ 198.518798] Modules linked in: [ 198.520582] CPU: 1 PID: 1388 Comm: ls Tainted: G [ 198.521800] Hardware name: linux,dummy-virt (DT) [ 198.522852] task: ffffffc0fa9e8000 ti: ffffffc0f9ab0000 task.ti: ffffffc0f9ab0000 [ 198.524306] PC is at next_tgid+0x30/0x100 [ 198.525205] LR is at return_to_handler+0x0/0x20 [ 198.526090] pc : [<ffffffc0002a1070>] lr : [<ffffffc0000907c0>] pstate: 60000145 [ 198.527392] sp : ffffffc0f9ab3d40 [ 198.528084] x29: ffffffc0f9ab3d40 x28: ffffffc0f9ab0000 [ 198.529406] x27: ffffffc000d6a000 x26: ffffffc000b786e8 [ 198.530659] x25: ffffffc0002a1900 x24: ffffffc0faf16c00 [ 198.531942] x23: ffffffc0f9ab3ea0 x22: 0000000000000002 [ 198.533202] x21: ffffffc000d85050 x20: 0000000000000002 [ 198.534446] x19: 0000000000000002 x18: 0000000000000000 [ 198.535719] x17: 000000000049fa08 x16: ffffffc000242efc [ 198.537030] x15: 0000007fa472b54c x14: ffffffffff000000 [ 198.538347] x13: ffffffc0fada84a0 x12: 0000000000000001 [ 198.539634] x11: ffffffc0f9ab3d70 x10: ffffffc0f9ab3d70 [ 198.540915] x9 : ffffffc0000907c0 x8 : ffffffc0f9ab3d40 [ 198.542215] x7 : 0000002e330f08f0 x6 : 0000000000000015 [ 198.543508] x5 : 0000000000000f08 x4 : ffffffc0f9835ec0 [ 198.544792] x3 : cb88537fdc8ba316 x2 : cb88537fdc8ba306 [ 198.546108] x1 : 0000000000000002 x0 : ffffffc000d85050 [ 198.547432] [ 198.547920] Process ls (pid: 1388, stack limit = 0xffffffc0f9ab0020) [ 198.549170] Stack: (0xffffffc0f9ab3d40 to 0xffffffc0f9ab4000) [ 198.582568] Call trace: [ 198.583313] [<ffffffc0002a1070>] next_tgid+0x30/0x100 [ 198.584359] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.585503] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.586574] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.587660] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.588896] Code: aa0003f5 2a0103f4 b4000102 91004043 (885f7c60) [ 198.591092] ---[ end trace 6a346f8f20949ac8 ]--- This is because when using function graph tracer, if the traced function return value is in multi regs ([x0-x7]), return_to_handler may corrupt them. So in return_to_handler, the parameter regs should be protected properly. Signed-off-by:
Li Bin <huawei.libin@huawei.com> Acked-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 0ce3cc00 upstream. The new Properties Table feature introduced in UEFIv2.5 may split memory regions that cover PE/COFF memory images into separate code and data regions. Since these regions only differ in the type (runtime code vs runtime data) and the permission bits, but not in the memory type attributes (UC/WC/WT/WB), the spec does not require them to be aligned to 64 KB. Since the relative offset of PE/COFF .text and .data segments cannot be changed on the fly, this means that we can no longer pad out those regions to be mappable using 64 KB pages. Unfortunately, there is no annotation in the UEFI memory map that identifies data regions that were split off from a code region, so we must apply this logic to all adjacent runtime regions whose attributes only differ in the permission bits. So instead of rounding each memory region to 64 KB alignment at both ends, only round down regions that are not directly preceded by another runtime region with the same type attributes. Since the UEFI spec does not mandate that the memory map be sorted, this means we also need to sort it first. Note that this change will result in all EFI_MEMORY_RUNTIME regions whose start addresses are not aligned to the OS page size to be mapped with executable permissions (i.e., on kernels compiled with 64 KB pages). However, since these mappings are only active during the time that UEFI Runtime Services are being invoked, the window for abuse is rather small. Tested-by:
Mark Salter <msalter@redhat.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [UEFI 2.4 only] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 397d425d upstream. In rare cases a directory can be renamed out from under a bind mount. In those cases without special handling it becomes possible to walk up the directory tree to the root dentry of the filesystem and down from the root dentry to every other file or directory on the filesystem. Like division by zero .. from an unconnected path can not be given a useful semantic as there is no predicting at which path component the code will realize it is unconnected. We certainly can not match the current behavior as the current behavior is a security hole. Therefore when encounting .. when following an unconnected path return -ENOENT. - Add a function path_connected to verify path->dentry is reachable from path->mnt.mnt_root. AKA to validate that rename did not do something nasty to the bind mount. To avoid races path_connected must be called after following a path component to it's next path component. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit cde93be4 upstream. A rename can result in a dentry that by walking up d_parent will never reach it's mnt_root. For lack of a better term I call this an escaped path. prepend_path is called by four different functions __d_path, d_absolute_path, d_path, and getcwd. __d_path only wants to see paths are connected to the root it passes in. So __d_path needs prepend_path to return an error. d_absolute_path similarly wants to see paths that are connected to some root. Escaped paths are not connected to any mnt_root so d_absolute_path needs prepend_path to return an error greater than 1. So escaped paths will be treated like paths on lazily unmounted mounts. getcwd needs to prepend "(unreachable)" so getcwd also needs prepend_path to return an error. d_path is the interesting hold out. d_path just wants to print something, and does not care about the weird cases. Which raises the question what should be printed? Given that <escaped_path>/<anything> should result in -ENOENT I believe it is desirable for escaped paths to be printed as empty paths. As there are not really any meaninful path components when considered from the perspective of a mount tree. So tweak prepend_path to return an empty path with an new error code of 3 when it encounters an escaped path. Signed-off-by:
-
Ulf Hansson authored
commit 43934ece upstream. When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS becomes propagated to the caller. Typically this means that the mmc host driver fails to probe. As the CD/WP GPIOs are already treated as optional, let's extend that to cover the case when CONFIG_GPIOLIB is unset. Reported-by:
Michal Simek <michal.simek@xilinx.com> Fixes: 16b23787 ("mmc: sdhci-of-arasan: Call OF parsing for MMC") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by:
-
Haibo Chen authored
commit d31911b9 upstream. Currently one mrq->data maybe execute dma_map_sg() twice when mmc subsystem prepare over one new request, and the following log show up: sdhci[sdhci_pre_dma_transfer] invalid cookie: 24, next-cookie 25 In this condition, mrq->date map a dma-memory(1) in sdhci_pre_req for the first time, and map another dma-memory(2) in sdhci_prepare_data for the second time. But driver only unmap the dma-memory(2), and dma-memory(1) never unmapped, which cause the dma memory leak issue. This patch use another method to map the dma memory for the mrq->data which can fix this dma memory leak issue. Fixes: 348487cb ("mmc: sdhci: use pipeline mmc requests to improve performance") Reported-and-tested-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Haibo Chen <haibo.chen@freescale.com> Signed-off-by:
-
shengyong authored
commit 7c7feb2e upstream. UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
-
Richard Weinberger authored
commit 281fda27 upstream. Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Signed-off-by:
-
Richard Weinberger authored
commit cf6f54e3 upstream. Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Reported-and-tested-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by:
<dedekind1@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 83fccfc3 upstream. When replacing del_timer() with del_timer_sync(), I introduced a deadlock condition : reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop() inet_csk_reqsk_queue_drop() can be called from many contexts, one being the timer handler itself (reqsk_timer_handler()). In this case, del_timer_sync() loops forever. Simple fix is to test if timer is pending. Fixes: 2235f2ac ("inet: fix races with reqsk timers") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Christian Engelmayer authored
commit a8b97745 upstream. Commit 5d5cd85f ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") also added a check on the allocation of DMA-accessible memory that may directly return. In that case the already allocated firmware data is leaked. Make sure the data is always freed correctly. Detected by Coverity CID 1316519. Fixes: 5d5cd85f ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paul Mackerras authored
commit e297c939 upstream. This fixes a race which can result in the same virtual IRQ number being assigned to two different MSI interrupts. The most visible consequence of that is usually a warning and stack trace from the sysfs code about an attempt to create a duplicate entry in sysfs. The race happens when one CPU (say CPU 0) is disposing of an MSI while another CPU (say CPU 1) is setting up an MSI. CPU 0 calls (for example) pnv_teardown_msi_irqs(), which calls msi_bitmap_free_hwirqs() to indicate that the MSI (i.e. its hardware IRQ number) is no longer in use. Then, before CPU 0 gets to calling irq_dispose_mapping() to free up the virtal IRQ number, CPU 1 comes in and calls msi_bitmap_alloc_hwirqs() to allocate an MSI, and gets the same hardware IRQ number that CPU 0 just freed. CPU 1 then calls irq_create_mapping() to get a virtual IRQ number, which sees that there is currently a mapping for that hardware IRQ number and returns the corresponding virtual IRQ number (which is the same virtual IRQ number that CPU 0 was using). CPU 0 then calls irq_dispose_mapping() and frees that virtual IRQ number. Now, if another CPU comes along and calls irq_create_mapping(), it is likely to get the virtual IRQ number that was just freed, resulting in the same virtual IRQ number apparently being used for two different hardware interrupts. To fix this race, we just move the call to msi_bitmap_free_hwirqs() to after the call to irq_dispose_mapping(). Since virq_to_hw() doesn't work for the virtual IRQ number after irq_dispose_mapping() has been called, we need to call it before irq_dispose_mapping() and remember the result for the msi_bitmap_free_hwirqs() call. The pattern of calling msi_bitmap_free_hwirqs() before irq_dispose_mapping() appears in 5 places under arch/powerpc, and appears to have originated in commit 05af7bd2 ("[POWERPC] MPIC U3/U4 MSI backend") from 2007. Fixes: 05af7bd2 ("[POWERPC] MPIC U3/U4 MSI backend") Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Kapileshwar Singh authored
commit c2e4b24f upstream. When a trace recorded on a 32-bit device is processed with a 64-bit binary, the higher 32-bits of the address need to ignored. The lack of this results in the output of the 64-bit pointer value to the trace as the 32-bit address lookup fails in find_printk(). Before: burn-1778 [003] 548.600305: bputs: 0xc0046db2s: 2cec5c058d98c After: burn-1778 [003] 548.600305: bputs: 0xc0046db2s: RT throttling activated The problem occurs in PRINT_FIELD when the field is recognized as a pointer to a string (of the type const char *) Heterogeneous architectures cases below can arise and should be handled: * Traces recorded using 32-bit addresses processed on a 64-bit machine * Traces recorded using 64-bit addresses processed on a 32-bit machine Reported-by:
Juri Lelli <juri.lelli@arm.com> Signed-off-by:
Kapileshwar Singh <kapileshwar.singh@arm.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Javi Merino <javi.merino@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Linus Lüssing authored
commit 53cf037b upstream. The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Linus Lüssing authored
commit 8a4023c5 upstream. So far the mcast tvlv handler did not anticipate the processing of multiple incoming OGMs from the same originator at the same time. This can lead to various issues: * Broken refcounting: For instance two mcast handlers might both assume that an originator just got multicast capabilities and will together wrongly decrease mcast.num_disabled by two, potentially leading to an integer underflow. * Potential kernel panic on hlist_del_rcu(): Two mcast handlers might one after another try to do an hlist_del_rcu(&orig->mcast_want_all_*_node). The second one will cause memory corruption / crashes. (Reported by: Sven Eckelmann <sven@narfation.org>) Right in the beginning the code path makes assumptions about the current multicast related state of an originator and bases all updates on that. The easiest and least error prune way to fix the issues in this case is to serialize multiple mcast handler invocations with a spinlock. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
Linus Lüssing authored
commit 9c936e3f upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
