1   3.0.101             [  OK  ]
2   3.1.10              [  OK  ]
3   3.2.72              [  OK  ]
4   3.3.8               [  OK  ]
5   3.4.110             [  OK  ]
6   3.5.7               [  OK  ]
7   3.6.11              [  OK  ]
8   3.7.10              [  OK  ]
9   3.8.13              [  OK  ]
10  3.9.11              [  OK  ]
11  3.10.92             [  OK  ]
12  3.11.10             [  OK  ]
13  3.12.49             [  OK  ]
14  3.13.11             [  OK  ]
15  3.14.56             [  OK  ]
16  3.15.10             [  OK  ]
17  3.16.7              [  OK  ]
18  3.17.8              [  OK  ]
19  3.18.23             [  OK  ]
20  3.19.8              [  OK  ]
21  4.0.9               [  OK  ]
22  4.1.12              [  OK  ]
23  4.2.5               [  OK  ]
24  4.3-rc7             [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: b3cb6250

commit 2e98a32a

 ("backport: add
of_property_read_u64_array()") added a call
to of_find_property_value_of_size(), which is a
static function, causing compilation error.

Implement it locally as well.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[remove of_find_property_value_of_size() from backport-3.10.c]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 258c9f45



VIDEO_MT9P031 uses the GPIO consumer and should only be build on
kernel version >= 3.13

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 2e98a32a

This function was added in commit b31384fa

 "Driver core: Unified
device properties interface for platform firmware".

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 129646a4



Instead of using the kernel version to check if we have to add a
backport for ACPI_COMPANION check for it directly. RedHat 7 backported
this change to their kernel and writes a warning without this change.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 4645e84f



Currently, a Makefile line like this:

    obj-$(CONFIG_IPW2100) += ipw2x00/

will get mangled into

    #obj-$(CONFIG_IPW2100+= ipw2x00/

when disabled by the gentree script. Fix the regular
expression to contain the entire match as the first
group, so it gets all preserved when replaced later
by "#\1" using expression.sub().

This then makes it come out as

    #obj-$(CONFIG_IPW2100) += ipw2x00/

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 0f7130e2



Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 1f67fcff



In order to make it possible to use GIT_TRACE, ignore stderr
in the bpgit scripting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Upstream commit: 6d60d24e



The upstream commit that added it was backported in 4.1.9

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1   3.0.101             [  OK  ]
2   3.1.10              [  OK  ]
3   3.2.71              [  OK  ]
4   3.3.8               [  OK  ]
5   3.4.108             [  OK  ]
6   3.5.7               [  OK  ]
7   3.6.11              [  OK  ]
8   3.7.10              [  OK  ]
9   3.8.13              [  OK  ]
10  3.9.11              [  OK  ]
11  3.10.88             [  OK  ]
12  3.11.10             [  OK  ]
13  3.12.47             [  OK  ]
14  3.13.11             [  OK  ]
15  3.14.52             [  OK  ]
16  3.15.10             [  OK  ]
17  3.16.7              [  OK  ]
18  3.17.8              [  OK  ]
19  3.18.21             [  OK  ]
20  3.19.8              [  OK  ]
21  4.0.9               [  OK  ]
22  4.1.7               [  OK  ]
23  4.2.0               [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This removes the old driver IEEE802154_FAKEHARD and adds two new
drivers.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

DVB_TDA10071 now uses regmap_bulk_write() which was added in kernel 3.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

VIDEO_TC358743 now uses the GPIO driver subsystem which is not
backported, make it depend on kernel 3.13.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

bcma gpio now uses the gpio driver subsystem which was added with
kernel 3.13.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The st-nci/spi.c driver uses some methods from linux/of.h, but does not
explicitly include this file. This is no problem on recent kernel
version, because this file gets included indirectly, on kernel 3.2 it
does not get included indirectly.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hci_intel.c now also uses gpio/consumer.h which is only available in
kernel >= 3.13. devm_gpiod_get_optional() with the current parameter
list is only available in kernel 3.17.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wake_up_interruptible() is missing in this patch, otherwise it will not
be woken up again. In addition this patch adds the missing
STATE_LPM_TRANSACTION state now and follows the moving of some parts in
the code of the driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

spi_sync_transfer() and spi_message_init_with_transfers() are used by
the st-nci nfc driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This is used by the brcmfmac driver since mainline commit 4e70f214

.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This flag doesn't exist on newer kernels, but replaced the tx_queue_len
assignment, so can't just be backported to have no effect. Instead, add
a semantic patch that puts back the tx_queue_len=0 assignment on older
kernel versions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The platform data file is called st-nci.h instead of st_nci.h.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1   3.0.101             [  OK  ]
2   3.1.10              [  OK  ]
3   3.2.71              [  OK  ]
4   3.3.8               [  OK  ]
5   3.4.108             [  OK  ]
6   3.5.7               [  OK  ]
7   3.6.11              [  OK  ]
8   3.7.10              [  OK  ]
9   3.8.13              [  OK  ]
10  3.9.11              [  OK  ]
11  3.10.88             [  OK  ]
12  3.11.10             [  OK  ]
13  3.12.47             [  OK  ]
14  3.13.11             [  OK  ]
15  3.14.52             [  OK  ]
16  3.15.10             [  OK  ]
17  3.16.7              [  OK  ]
18  3.17.8              [  OK  ]
19  3.18.21             [  OK  ]
20  3.19.8              [  OK  ]
21  4.0.9               [  OK  ]
22  4.1.7               [  OK  ]
23  4.2.0               [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

netup-unidvb uses spi_finalize_current_message() now which is not
available on < 3.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The mwifiex SDIO driver needs mmc_hw_reset() which was added in kernel 3.2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

brcmfmac uses atomic_or(), but does not include linux/atomic.h which
causes problems on kernel 3.0

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The GPIO configuration in the hci_bcm driver is now fetched from ACPI,
which only works in kernel version >= 3.19. In addition it used these
GPIO informations with the gpio consumer framework which was added in
3.13, deactivate these new features if the kernel does not support them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This adds support for gcc 5.

In kernel version >= 3.18 this is shipped with the kernel, in kernel
version >= 4.2 all the gcc version specific files are merged into one
file.
This patch got backported to many kernel versions, but ignore it
because it is always the same file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mei_cl_register_event_cb() got a new parameter in bb2ef9c3

, currently
it is used in the same way as before so just ignoring it should be save.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This adds page_is_pfmemalloc() which is used by the igb driver.
The direct access to page->pfmemalloc was replaced by this function
call in 54d985ce23 upstream commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This adds an empty implementation of acpi_dev_remove_driver_gpios() for
kernel version < 3.19, on these versions we do not support these acpi
features.
This is used by hci_bcm.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

My patches to remove the out-of-line EWMA implemenation (under
Kconfig symbol AVERAGE) went into net-next, so now we only need
to backport DECLARE_EWMA as the only necessary macro.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This allows using a different HTTP[S] proxy for input and output
trees, if necessary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1   3.0.101             [  OK  ]
2   3.1.10              [  OK  ]
3   3.2.69              [  OK  ]
4   3.3.8               [  OK  ]
5   3.4.108             [  OK  ]
6   3.5.7               [  OK  ]
7   3.6.11              [  OK  ]
8   3.7.10              [  OK  ]
9   3.8.13              [  OK  ]
10  3.9.11              [  OK  ]
11  3.10.84             [  OK  ]
12  3.11.10             [  OK  ]
13  3.12.44             [  OK  ]
14  3.13.11             [  OK  ]
15  3.14.48             [  OK  ]
16  3.15.10             [  OK  ]
17  3.16.7              [  OK  ]
18  3.17.8              [  OK  ]
19  3.18.19             [  OK  ]
20  3.19.8              [  OK  ]
21  4.0.9               [  OK  ]
22  4.1.3               [  OK  ]
23  4.2-rc3             [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The driver with the config symbols CONFIG_WL1251_SDIO uses the
CONFIG_WILINK_PLATFORM_DATA driver for providing the platform data. If
this is not build into the kernel there is no use for this driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The driver with the config option NFC_NXP_NCI_I2C now uses
devm_gpiod_get_index() with 4 arguments which is not supported in
backports.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

of_platform_populate() is not added when CONFIG_OF_DEVICE is not set on
kernel < 3.4.
The same is true for of_default_bus_match_table on kernel < 3.11. we do
not need to provide a real implementation of of_default_bus_match_table
because it will be accessed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

In older kernel versions the first parameter is "struct inet_frag_queue
*q", now it is "struct netns_frags *nf", This patch adds the new
versions of this function to all kernel versions older than 4.3.

This change was done in upstream Linux kernel in this commit:
commit 0e60d245


Author: Florian Westphal <fw@strlen.de>
Date:   Thu Jul 23 12:05:38 2015 +0200

    inet: frag: change *_frag_mem_limit functions to take netns_frags as argument

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

seq_hex_dump() is needed by the wil6210 driver and was added in this
commit:
commit 96e6df4cfc6ecf91097eb8eec55983a5f102a477
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date:   Fri Jul 24 09:11:53 2015 +1000

    seq_file: provide an analogue of print_hex_dump()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>