- Sep 22, 2015
-
-
Hauke Mehrtens authored
1 3.0.101 [ OK ] 2 3.1.10 [ OK ] 3 3.2.71 [ OK ] 4 3.3.8 [ OK ] 5 3.4.108 [ OK ] 6 3.5.7 [ OK ] 7 3.6.11 [ OK ] 8 3.7.10 [ OK ] 9 3.8.13 [ OK ] 10 3.9.11 [ OK ] 11 3.10.88 [ OK ] 12 3.11.10 [ OK ] 13 3.12.47 [ OK ] 14 3.13.11 [ OK ] 15 3.14.52 [ OK ] 16 3.15.10 [ OK ] 17 3.16.7 [ OK ] 18 3.17.8 [ OK ] 19 3.18.21 [ OK ] 20 3.19.8 [ OK ] 21 4.0.9 [ OK ] 22 4.1.7 [ OK ] 23 4.2.0 [ OK ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This removes the old driver IEEE802154_FAKEHARD and adds two new drivers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
DVB_TDA10071 now uses regmap_bulk_write() which was added in kernel 3.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
VIDEO_TC358743 now uses the GPIO driver subsystem which is not backported, make it depend on kernel 3.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
bcma gpio now uses the gpio driver subsystem which was added with kernel 3.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
The st-nci/spi.c driver uses some methods from linux/of.h, but does not explicitly include this file. This is no problem on recent kernel version, because this file gets included indirectly, on kernel 3.2 it does not get included indirectly. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
hci_intel.c now also uses gpio/consumer.h which is only available in kernel >= 3.13. devm_gpiod_get_optional() with the current parameter list is only available in kernel 3.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
wake_up_interruptible() is missing in this patch, otherwise it will not be woken up again. In addition this patch adds the missing STATE_LPM_TRANSACTION state now and follows the moving of some parts in the code of the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
spi_sync_transfer() and spi_message_init_with_transfers() are used by the st-nci nfc driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This is used by the brcmfmac driver since mainline commit 4e70f214 . Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Sep 21, 2015
-
-
Johannes Berg authored
This flag doesn't exist on newer kernels, but replaced the tx_queue_len assignment, so can't just be backported to have no effect. Instead, add a semantic patch that puts back the tx_queue_len=0 assignment on older kernel versions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Arend van Spriel authored
The platform data file is called st-nci.h instead of st_nci.h. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Sep 14, 2015
-
-
Hauke Mehrtens authored
1 3.0.101 [ OK ] 2 3.1.10 [ OK ] 3 3.2.71 [ OK ] 4 3.3.8 [ OK ] 5 3.4.108 [ OK ] 6 3.5.7 [ OK ] 7 3.6.11 [ OK ] 8 3.7.10 [ OK ] 9 3.8.13 [ OK ] 10 3.9.11 [ OK ] 11 3.10.88 [ OK ] 12 3.11.10 [ OK ] 13 3.12.47 [ OK ] 14 3.13.11 [ OK ] 15 3.14.52 [ OK ] 16 3.15.10 [ OK ] 17 3.16.7 [ OK ] 18 3.17.8 [ OK ] 19 3.18.21 [ OK ] 20 3.19.8 [ OK ] 21 4.0.9 [ OK ] 22 4.1.7 [ OK ] 23 4.2.0 [ OK ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
netup-unidvb uses spi_finalize_current_message() now which is not available on < 3.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
The mwifiex SDIO driver needs mmc_hw_reset() which was added in kernel 3.2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
brcmfmac uses atomic_or(), but does not include linux/atomic.h which causes problems on kernel 3.0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
The GPIO configuration in the hci_bcm driver is now fetched from ACPI, which only works in kernel version >= 3.19. In addition it used these GPIO informations with the gpio consumer framework which was added in 3.13, deactivate these new features if the kernel does not support them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This adds support for gcc 5. In kernel version >= 3.18 this is shipped with the kernel, in kernel version >= 4.2 all the gcc version specific files are merged into one file. This patch got backported to many kernel versions, but ignore it because it is always the same file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Sep 13, 2015
-
-
Hauke Mehrtens authored
mei_cl_register_event_cb() got a new parameter in bb2ef9c3 , currently it is used in the same way as before so just ignoring it should be save. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This adds page_is_pfmemalloc() which is used by the igb driver. The direct access to page->pfmemalloc was replaced by this function call in 54d985ce23 upstream commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This adds an empty implementation of acpi_dev_remove_driver_gpios() for kernel version < 3.19, on these versions we do not support these acpi features. This is used by hci_bcm.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Johannes Berg authored
My patches to remove the out-of-line EWMA implemenation (under Kconfig symbol AVERAGE) went into net-next, so now we only need to backport DECLARE_EWMA as the only necessary macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Johannes Berg authored
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Johannes Berg authored
This allows using a different HTTP[S] proxy for input and output trees, if necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Aug 03, 2015
-
-
Hauke Mehrtens authored
1 3.0.101 [ OK ] 2 3.1.10 [ OK ] 3 3.2.69 [ OK ] 4 3.3.8 [ OK ] 5 3.4.108 [ OK ] 6 3.5.7 [ OK ] 7 3.6.11 [ OK ] 8 3.7.10 [ OK ] 9 3.8.13 [ OK ] 10 3.9.11 [ OK ] 11 3.10.84 [ OK ] 12 3.11.10 [ OK ] 13 3.12.44 [ OK ] 14 3.13.11 [ OK ] 15 3.14.48 [ OK ] 16 3.15.10 [ OK ] 17 3.16.7 [ OK ] 18 3.17.8 [ OK ] 19 3.18.19 [ OK ] 20 3.19.8 [ OK ] 21 4.0.9 [ OK ] 22 4.1.3 [ OK ] 23 4.2-rc3 [ OK ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
The driver with the config symbols CONFIG_WL1251_SDIO uses the CONFIG_WILINK_PLATFORM_DATA driver for providing the platform data. If this is not build into the kernel there is no use for this driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
The driver with the config option NFC_NXP_NCI_I2C now uses devm_gpiod_get_index() with 4 arguments which is not supported in backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
of_platform_populate() is not added when CONFIG_OF_DEVICE is not set on kernel < 3.4. The same is true for of_default_bus_match_table on kernel < 3.11. we do not need to provide a real implementation of of_default_bus_match_table because it will be accessed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
In older kernel versions the first parameter is "struct inet_frag_queue *q", now it is "struct netns_frags *nf", This patch adds the new versions of this function to all kernel versions older than 4.3. This change was done in upstream Linux kernel in this commit: commit 0e60d245 Author: Florian Westphal <fw@strlen.de> Date: Thu Jul 23 12:05:38 2015 +0200 inet: frag: change *_frag_mem_limit functions to take netns_frags as argument Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
seq_hex_dump() is needed by the wil6210 driver and was added in this commit: commit 96e6df4cfc6ecf91097eb8eec55983a5f102a477 Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Fri Jul 24 09:11:53 2015 +1000 seq_file: provide an analogue of print_hex_dump() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
In the kernel hex_dump_to_buffer() got an int return value, returning the amount of bytes written into the buffer. This new return value is needed by seq_hex_dump() which we also backport. This change was done in the following commit in mainline Linux kernel: commit 114fc1af Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Thu Feb 12 15:02:29 2015 -0800 hexdump: make it return number of bytes placed in buffer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
An ifdef for the kernel version was missing around the header of debugfs_create_devm_seqfile() and the LINUX_BACKPORT() was also not added. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Jul 23, 2015
-
-
Hauke Mehrtens authored
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This adds basic support for debian packages using the xz compression algorithm. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This converts the backports-update-manager to use python3 instead of python2. python3 is needed because new Debian packages are compressed with the xz algorithm and only the tar module of python3 supports this algorithm. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
1 3.0.101 [ OK ] 2 3.1.10 [ OK ] 3 3.2.69 [ OK ] 4 3.3.8 [ OK ] 5 3.4.108 [ OK ] 6 3.5.7 [ OK ] 7 3.6.11 [ OK ] 8 3.7.10 [ OK ] 9 3.8.13 [ OK ] 10 3.9.11 [ OK ] 11 3.10.84 [ OK ] 12 3.11.10 [ OK ] 13 3.12.44 [ OK ] 14 3.13.11 [ OK ] 15 3.14.48 [ OK ] 16 3.15.10 [ OK ] 17 3.16.7 [ OK ] 18 3.17.8 [ OK ] 19 3.18.19 [ OK ] 20 3.19.8 [ OK ] 21 4.0.9 [ OK ] 22 4.1.3 [ OK ] 23 4.2-rc3 [ OK ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
Hauke Mehrtens authored
This was intoduced in this commit: commit 431a9e1713c512bb96d570dc84e518384d1ac62b Author: Loic Poulain <loic.poulain@intel.com> Date: Wed Jul 1 12:20:26 2015 +0200 Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
- Jul 21, 2015
-
-
Luis R. Rodriguez authored
It seems new versions of python make the os walk recurse more than we used to before, our ckmake implementation was picking up more kernels targets than obviously we want to build then. Fix this by replacing the os.walk() with a simple os.listdir() which just keeps us at the top level directory of lib/modules. While at it, this adds the --develdebug option which lets you debug the the directory naming it will use for display and what directories it will traverse without actually compiling anything and without using ncurses. For instance to debug or ckmake without compilation you can use: $ ckmake --allyesconfig --develdebug Paths for kernels: 3.4.103-0304103-generic 3.9.11-030911-generic 3.2.62-030262-generic 3.16.2-031602-generic 3.11.10-031110-generic 3.8.13-030813-generic 3.5.7-03050712-generic 3.0.101-0300101-generic 3.15.10-031510-generic 3.6.11-030611-generic 3.13.11-031311-generic 3.1.10-030110-generic 3.10.54-031054-generic 3.3.8-030308-generic 3.7.10-030710-generic 3.14.18-031418-generic 3.17.0-031700rc3-generic 3.12.27-031227-generic IDX VERSION DIRECTORY 1 3.0.101 /home/mcgrof/ksrc-backports/lib/modules/3.0.101-0300101-generic 2 3.1.10 /home/mcgrof/ksrc-backports/lib/modules/3.1.10-030110-generic 3 3.2.62 /home/mcgrof/ksrc-backports/lib/modules/3.2.62-030262-generic 4 3.3.8 /home/mcgrof/ksrc-backports/lib/modules/3.3.8-030308-generic 5 3.4.103 /home/mcgrof/ksrc-backports/lib/modules/3.4.103-0304103-generic 6 3.5.7 /home/mcgrof/ksrc-backports/lib/modules/3.5.7-03050712-generic 7 3.6.11 /home/mcgrof/ksrc-backports/lib/modules/3.6.11-030611-generic 8 3.7.10 /home/mcgrof/ksrc-backports/lib/modules/3.7.10-030710-generic 9 3.8.13 /home/mcgrof/ksrc-backports/lib/modules/3.8.13-030813-generic 10 3.9.11 /home/mcgrof/ksrc-backports/lib/modules/3.9.11-030911-generic 11 3.10.54 /home/mcgrof/ksrc-backports/lib/modules/3.10.54-031054-generic 12 3.11.10 /home/mcgrof/ksrc-backports/lib/modules/3.11.10-031110-generic 13 3.12.27 /home/mcgrof/ksrc-backports/lib/modules/3.12.27-031227-generic 14 3.13.11 /home/mcgrof/ksrc-backports/lib/modules/3.13.11-031311-generic 15 3.14.18 /home/mcgrof/ksrc-backports/lib/modules/3.14.18-031418-generic 16 3.15.10 /home/mcgrof/ksrc-backports/lib/modules/3.15.10-031510-generic 17 3.16.2 /home/mcgrof/ksrc-backports/lib/modules/3.16.2-031602-generic 18 3.17-rc3 /home/mcgrof/ksrc-backports/lib/modules/3.17.0-031700rc3-generic Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-
Luis R. Rodriguez authored
The 0002-no_dmabuf patch series creates the largest delta for backports, and it turns out we can generalize it thorugh SmPL. There's just a few changes we can't get rid of as they relate to other build things. 1 3.0.101 [ OK ] 2 3.1.10 [ OK ] 3 3.2.68 [ OK ] 4 3.3.8 [ OK ] 5 3.4.107 [ OK ] 6 3.5.7 [ OK ] 7 3.6.11 [ OK ] 8 3.7.10 [ OK ] 9 3.8.13 [ OK ] 10 3.9.11 [ OK ] 11 3.10.75 [ OK ] 12 3.11.10 [ OK ] 13 3.12.40 [ OK ] 14 3.13.11 [ OK ] 15 3.14.39 [ OK ] 16 3.15.10 [ OK ] 17 3.16.7 [ OK ] 18 3.17.8 [ OK ] 19 3.18.12 [ OK ] 20 3.19.5 [ OK ] 21 4.0.0 [ OK ] 22 4.1-rc8 [ OK ] Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-